The first step was to clear a spot. As I mentioned, we had a section of a cabinet and a stack of drawers that measured 29" wide, right next to the sink, which accommodates a dishwasher perfectly. I removed all the drawers and the cabinet drawer, and then used my Dremel tool to cut away the rest of the cabinet and pull it out.
But what's a big empty space without water or electrical? Not a very good place for a dishwasher. Lucky for me in this case, the space below our kitchen is a wide open crawl space, so it was easy for me to tap into a very lightly used electrical circuit and sting up a new wire to hot wire directly into the dishwasher.
I thought that the plumbing would be really hard, but it was actually a piece of cake, and I believe anyone could do this part of the project on their own. I found this dishwasher connector kit, with a 4 foot hose that reached right to my location, but you can buy a kit with a longer hose if you have farther to go.
Next all I had to do was reconnect the hot water line to the faucet hose, and add the dishwasher hot water hose that was supplied to the other opening.
I just drilled a hole through the cabinet and fed the new dishwasher waterline through, where it could connect directly to the dishwasher. Piece of cake. Far easier than getting the new dishwasher into the house by myself was. I ended up rigging this ramp out of spare boards and pulling it up with an old dolly I found in the garage.
Viola! Wait... we're not done yet, are we?
Obviously I have a pretty ugly gap to cover up. I purchased a 4 foot length of 1x4 oak, which happened to fit the space perfectly, I just had to chop off a few inches of length with my chop saw. Then I drilled a number of pocket holes into the board so I could connect it to the adjacent cabinet.
Then I rounded up all my pints-of-stain-past and tested stain colors on the wood scrap. I was worried that I would have to mix a few to get the perfect color, but lucky for me two coats of English Chestnut was a spot-on match.
Once my panel was dry I used the pocket screws to attach it, and I wasn't thrilled.
The color was perfect, but the holes where the hinges used to be really stood out, even when I filled them with stainable wood putty.
That photo is decidedly more enjoyable to look at if you try to imagine that the ugly floors and fake wood counter tops aren't there. And if you can do that- will you please teach me how? So it may be "just a cabin," but now it's a cabin with a magic box that washes our dishes for us. And I couldn't be happier.